| 1 |
Eco-Friendly Synthesis of ZnO and Ag-doped ZnO Nanoparticles using Onion Peel Extract.: Characterization and Comparative Analysis |
Journal of Chemistry Select, Accepted on 11 August, 2025 |
Shah Sadia Rahman Joya, Sanjida Nusrat Prerona, M. Humayan Kabir, Anik Molla, Md. Faruk Hossain and M.S. Rahman |
2025 |
Journal |
CME |
Professor Dr. Md. Shamimur Rahman |
| 2 |
Exploration of optical and frequency dependent electrical properties of boron-cobalt co-doped ZnO thin films |
Optical Materials 148, 17 January 2024, 114949. |
Md. Mintu Ali, M. Humayan Kabir, Md. Shamimur Rahman |
2024 |
Journal |
CME |
Professor Dr. Md. Shamimur Rahman |
| 3 |
Influence of multi-doping (Zn and Sn) on the optical, and electrical properties of spray-deposited CdO thin films |
PHYSICS b, Condensed Matter, Volume 690, 1 October 2024, 416270. |
Md. Kamruzzaman, Maruf Hassan Nishat, Md. Mintu Ali, M. Humayan Kabir, M S Rahman |
2024 |
Journal |
CME |
Professor Dr. Md. Shamimur Rahman |
| 4 |
Modification of structural, morphological, and dielectric properties of barium calcium titanate ceramics with yttrium addition |
Heliyon, Volume 10, Issue 5, 15 March 2024, e27124 |
Hasnat Jahan Sumona, Abdullah Al Mahmood Jahid Hasan Kasem, M.S. Rahman , M. Bodiul Islam, |
2024 |
Journal |
CME |
Professor Dr. Md. Shamimur Rahman |
| 5 |
Investigation of The Effect of Gallium (Ga) On Properties of Zinc Oxide (ZnO) Thin Films Prepared by Spray Pyrolysis Technique |
Journal of Optics, 21 March 2024, Volume 53, pages 4950–4960 |
Munjar Hafiz, M. Humayan Kabir, Suhanur Rahman, M. M. Rashid, Md. Saifur Rahman, Habibur Rahman, M. Mintu Ali, M. Jahidul Haque & M. S. Rahman |
2024 |
Journal |
CME |
Professor Dr. Md. Shamimur Rahman |
| 6 |
Formulation of Glass-Ceramic Glaze from Recycled Glass Waste to Enhance the Mechanical, Thermal, Optical and Chemical Properties of Ceramic Tiles |
International Conference on Mechanical, Industrial and Materials Engineering, ICMIME2024, 11-13 December, 2024 |
M. Golam Mortuza Nion, Hasnat Jahan Sumona, M.S. Rahman |
2024 |
Conference |
CME |
Professor Dr. Md. Shamimur Rahman |
| 7 |
Effect of Ga doping on structural, morphological, optical and electrical properties of CuO thin films deposited by spray pyrolysis technique |
Mater Sci: Mater Electron 34, 1258 (2023) |
M. Humayan Kabir, Munjar Hafiz, Suhanur Rahman, Md. Saifur Rahman, Habibur Rahman, M. M. Rashid, Md. Faruk Hossain, M. Mintu Ali, M. Jahidul Haque, M. K. R. Khan & M. S. Rahman |
2023 |
Journal |
CME |
Professor Dr. Md. Shamimur Rahman |
| 8 |
Bio degradation of Industrial Materials |
Handbook of Biodegradable Materials, pp 1407-1448, Springer Publisher, Online ISSBN:978-3-031-09710-2, First Online, 21 Feb.2023. |
Md. Jahidul Haque, and M.S. Rahman |
2023 |
Book |
CME |
Professor Dr. Md. Shamimur Rahman |
| 9 |
Effect of novel phase change material (PCM) encapsulated design on thermal performance of solar collector |
Results in Materials, Elsevier, Volume 18, June 2023, 100388 |
M.F.I. Al Imam, R.A. Beg, M.J. Haque, M.S. Rahman |
2023 |
Journal |
CME |
Professor Dr. Md. Shamimur Rahman |
| 10 |
Study of the Morphological, Electrical and Optical Properties of Ca4SrCu3Ti4O12 Ceramic. |
7th International Conference on Chemical Engineering (ICChE 2023) 20-22 December 2023, Dhaka, Bangladesh |
Md Khairul Islam*, Md Shamimur Rahman, Shamima Akhter Urmi, Abdullah Al Mamun, and Joyen Uddin |
2023 |
Conference |
CME |
Professor Dr. Md. Shamimur Rahman |
| 11 |
Fabrication of Lanthanum doped Calcium Copper Titanate (CCTO) Electroceramic for Energy Storage Application |
Paper ID: ICSED2023-41 International Conference on Sustainable Engineering Development (ICSED-2023) 24-25 May 2023, DUET, Gazipur, Bangladesh |
Md Khairul Islam*, Md Shamimur Rahman, Shamima Akhter Urmi, Abdullah Al Mamun, and Joyen Uddin |
2023 |
Conference |
CME |
Professor Dr. Md. Shamimur Rahman |
| 12 |
Usage of Bionanomaterials in Production of Solar Energy |
Apple Academic Press & CRC Press (Tailor & Francis Group), ISBN: 9781774912010 |
Md. Jahidul Haque, Zahidul Islam, Ahmed Sidrat Rahman Ayon, Akib Jabed, Zarin Rafa Shaitee, Sanzana Tabassum Proma, Mst. Esmotara Begum, M. Humayan Kabir, M. Mintu Page 7 of 12 Ali, M. Abdul Kaiyum, and M. S. Rahman |
2022 |
Book |
CME |
Professor Dr. Md. Shamimur Rahman |
| 13 |
Advanced Nanomaterials for Dentistry, Sustainable Nanomaterials for Biosystem Engineering Impacts, Challenges, and Future Prospects |
Apple Academic Press & CRC Press (Tailor & Francis Group), ISBN: 9781774910665 |
Md. Jahidul Haque, Ahsan Habib Munna, Ahmed Sidrat Rahman Ayon, Zarin Rafa Shaitee, Sanzana Tabassum Proma, Sadia Akter, Tasnuva Humaira, Humayan Kabir, Mintu Ali, Abdul Kaiyum, and Shamimur Rahman |
2022 |
Book |
CME |
Professor Dr. Md. Shamimur Rahman |
| 14 |
Effect of Ga doping on microstructure, morphology, optical and electrical properties of spray deposited CdO thin films |
Optical Materials Volume 125, March 2022, 112123 |
M Humayan Kabir, Munjar Hafiz, Shamima Akhter Urmi, M Jahidul Haque, M Mintu Ali, Md Saifur Rahman, MKR Khan, M S Rahman |
2022 |
Journal |
CME |
Professor Dr. Md. Shamimur Rahman |
| 15 |
A Prospective Review on Dense and High Ionic Conductivity of LSGM Electrolytes Sintered at Lower Temperature through Different Routes |
4th International Conference on Physics for Sustainable Development and Technology (ICPSDT-2022) |
M. Mintu Ali, Md. Jahidul Haque, Md. Zahurul Islam, M S Rahman |
2022 |
Conference |
CME |
Professor Dr. Md. Shamimur Rahman |
| 16 |
A Comprehensive Review Regarding the Technological Development of ZnO Thin Films From 2018 To 2021 |
4th International Conference on Physics for Sustainable Development and Technology (ICPSDT-2022) |
M. Mintu Ali, Md. Jahidul Haque, Subhro Roy, Md. Nafiul Islam Sarker, Ariful Bari Rifat, Showvik Saha, M. Humayan Kabir, M S Rahman |
2022 |
Conference |
CME |
Professor Dr. Md. Shamimur Rahman |
| 17 |
Effect of Sr doping on structural, morphological, optical and electrical properties of spray pyrolized CdO thin films |
Journal of Materials Science: Materials in Electronics volume 32, pages 3834–3842 |
M. Humayan Kabir, Antara Bhattacharjee, M. Manjorul Islam, M. S. Rahman, Md. Saifur Rahman & M. K. R. Khan |
2021 |
Journal |
CME |
Professor Dr. Md. Shamimur Rahman |
| 18 |
Nano synthesis of ZnO–TiO2 composites by sol-gel method and evaluation of their antibacterial, optical and photocatalytic activities |
Results in Materials Volume (Elsevier), Vol. 11, 100199 |
M. Mintu Ali, Md. Jahidul Haque, M. Humayan Kabir, M. Abdul Kaiyum and M. S. Rahman |
2021 |
Journal |
CME |
Professor Dr. Md. Shamimur Rahman |
| 19 |
Effect of Al doping on morphology and optical properties of spray pyrolized MgO thin films |
Results in Materials Volume (Elsevier), Vol. 12, 100199 |
M. Golam Mortuza Nion, M. Humayan Kabir, Marjanun Akter Mona, M. Jahidul Haque, Nayem Shahariar, Munjar Hafiz, M. S. Rahman |
2021 |
Journal |
CME |
Professor Dr. Md. Shamimur Rahman |
| 20 |
Effects of Iron Doping on Properties of TiO2 Thin Film Prepared by Spin Coating Method |
Journal of Surface Investigation X-ray Synchrotron and Neutron Techniques 15(6):1225-1231 |
M. Abdul Kaiyum, M. Humayan Kabir, Md. Mintu Ali, M. Shamimur Rahman |
2021 |
Journal |
CME |
Professor Dr. Md. Shamimur Rahman |
| 21 |
Structural, electrical, and magnetic characterization of (1-x)BaTiO3-xNi0.6Zn0.4Fe2O4 multiferroic ceramic composites |
Materials Engineering Research, Vol. 3, Issue 1 |
Golam Mowla, Nabid Hossain, M. Humayan Kabir, M. Jahidul Haque, M. Mintu Ali, M. Abdul Kaiyum, M. S. Rahman |
2021 |
Journal |
CME |
Professor Dr. Md. Shamimur Rahman |
| 22 |
Effects of Binder on Physical and Mechanical Properties on Unglazed Ceramic Tiles |
Journal of Engineering and Applied Science Vol. 4, No. 1, pp. 42–51 |
M. Mintu Ali, M Nion, M S Rahman |
2020 |
Journal |
CME |
Professor Dr. Md. Shamimur Rahman |
| 23 |
Manufacturing & Characterization of Glass Samples with Three Different Sources of Silica: Possible Alternatives for Quartz in Glass Manufacturing |
International Conference on Materials, Energy, Environment and Engineering (ICMEEE) |
Shamima Akther Urmi , G. M. Sadrul Islam, Mainul Islam , M. S. Rahman |
2020 |
Conference |
CME |
Professor Dr. Md. Shamimur Rahman |
| 24 |
Physio-Mechanical behavior of different types of local and imported clays as a raw material used in traditional ceramic body preparation |
International Conference on Materials, Energy, Environment and Engineering (ICMEEE) |
Md. Mintu Ali, B.A.Johan, M. Shohan Ali, M. Humayan Kabir, M.A. Kaiyum, M. Khairul Islam, M. S Rahman |
2020 |
Conference |
CME |
Professor Dr. Md. Shamimur Rahman |
| 25 |
Effect of annealing temperature on structural morphological and optical properties of spray pyrolized Al-doped ZnO thin films |
Journal of Physics Communications 3 (10), 105007 |
M Humayan Kabir, M Mintu Ali, M Abdul Kaiyum and M S Rahman |
2019 |
Journal |
CME |
Professor Dr. Md. Shamimur Rahman |
| 26 |
Effect of Annealing on Physio-Optical Properties of ZnO Thin Films Prepared by Spray Pyrolysis Technique |
5th International Conference on Engineering Research, Innovation and Education (ICERIE 2019) |
M.Humayan Kabir, M N A Chowdhury and M.S.Rahman |
2019 |
Conference |
CME |
Professor Dr. Md. Shamimur Rahman |
| 27 |
Investigation of Physical Properties of Locally (Rajshahi, Bangladesh) Available Clay |
Journal of Advances in Geotechnical Engineering: 2 pp. 1-5 (3) |
M.A. Kaiyum; S. Rahman |
2019 |
Journal |
CME |
Professor Dr. Md. Shamimur Rahman |
| 28 |
Mono and co-substitution of Sr2+ and Ca2+ on the structural, electrical and optical properties of barium titanate ceramics |
Ceramics International Volume 45, Issue 8, 1 June 2019, Pages 10154-10162 |
Tasmia Zaman, Md Khairul Islam, Md Abdur Rahman, Arman Hussain, Md Abdul Matin, Md Shamimur Rahman |
2019 |
Journal |
CME |
Professor Dr. Md. Shamimur Rahman |
| 29 |
Enhancement of Fatigue Behavior of PVD Coated Ceramic Thin Film Deposited on Titanium Alloy |
International Conference on Mechanical, Industrial and Materials Engineering (ICMIME2019) 17-19 December, 2019, RUET, Rajshahi, Bangladesh |
Md. Shamimur Rahman, Md. Abdul Kaiyum, Md. Mintu Ali |
2019 |
Conference |
CME |
Professor Dr. Md. Shamimur Rahman |
| 30 |
Influence of Al doping on microstructure, morphology, optical and photoluminescence properties of pyrolytic ZnO thin films prepared in an ambient atmosphere |
Chinese journal of physics 56 (5), 2275-2284) |
M.Humayan Kabir, M.Al amin, M.S.Rahman and M.K.R.Khan |
2018 |
Journal |
CME |
Professor Dr. Md. Shamimur Rahman |
| 31 |
Evolution and characterization of eggshell as a potential candidate of raw material |
Ceramica 64(370):236-241 |
T. Zaman, Mst. S. Mostari, Md. A. Al Mahmood, Md. S. Rahman |
2018 |
Journal |
CME |
Professor Dr. Md. Shamimur Rahman |
| 32 |
Solution for Raw Material Crisis in Bricks and Tiles Manufacturing Industries |
International Journal of Latest Trends in Engineering and Technology, Vol. 8, No. 2, 2017, pp. 120-127 |
Shamimur Rahman, Abdullah Al Mahmood |
2017 |
Journal |
CME |
Professor Dr. Md. Shamimur Rahman |
| 33 |
Ceramic Raw Materials - Different Clays |
LAP LAMBERT Academic Publishing, ISBN-13: 978-3-330-05396-0, ISBN-10: 3330053968, EAN: 9783330053960 |
Abdullah Al Mahmood and Shamimur Rahman |
2017 |
Book |
CME |
Professor Dr. Md. Shamimur Rahman |
| 34 |
Effect of Al Doping on Thickness, Optical, Morphological and Structural Properties of TiO2 Thin Film Prepared by Spin Coating Method |
Journal of Thin Films Research, Volume 1,Issue 1,2017 Pages 17-19 |
Md. Shamimur Rahman, Md. Abdul Kaiyum, Md. Aminul Islam |
2017 |
Journal |
CME |
Professor Dr. Md. Shamimur Rahman |
| 35 |
Comparative Analysis of Ceramic Product Manufactured from Traditional Raw Materials and Local Raw Materials in Bangladesh |
Engineering International, ISSN: 2409 -3629, Volume: 04 No.01, Dec -2016, pp. 41-48 |
Abdullah Al Mahmood, Shamimur Rahman, Omar Faruque, Tanmoy Kishor |
2016 |
Journal |
CME |
Professor Dr. Md. Shamimur Rahman |
| 36 |
Crack initiation and fatigue behaviour evaluation of ceramic film deposited on Ti-6Al-4V alloy |
International Journal of Materials Science and Applications (IJMSA), USA, Vol. 3, No. 5, 2014, pp. 246-249 |
Md. Shamimur Rahman and Md. Abdullah Al Mahmood |
2014 |
Journal |
CME |
Professor Dr. Md. Shamimur Rahman |
| 37 |
Effect of substrate bias voltage on fretting fatigue behaviour of ceramic film deposited on Ti-6Al-4V alloy |
International Journal of Materials Science and Applications (IJMSA), USA, Vol. 3, No. 5, 2014, pp. 250-253 |
Md. Shamimur Rahman and Md. Abdullah Al Mahmood |
2014 |
Journal |
CME |
Professor Dr. Md. Shamimur Rahman |
| 38 |
Using Analytical Hierarchy Process for Optimization of Gas Metal Arc Welding (GMAW) Parameters |
International Conference on Mechanical Engineering and Renewable Energy (ICMERE-2014) |
M. A. A. Mahmood, T. Zaman, M. S. Rahman and M. J. Abedin |
2014 |
Conference |
CME |
Professor Dr. Md. Shamimur Rahman |
| 39 |
Influence of Heat Treatment on Fatigue and Fracture Behavior of Aluminium Alloys |
International Conference on Engineering Research, Innovation and Education (ICERIE 2013) |
Md. Forhad Ibne Al Imam, Md. Shamimur Rahman, Md. Abdullah Al Mahmood |
2013 |
Conference |
CME |
Professor Dr. Md. Shamimur Rahman |
| 40 |
Optimization of Process Parameters in MIG Welding by Using Analytical Hierarchy Process |
International Conference on Mechanical Engineering and Renewable Energy (ICMERE 2013) |
M. S. Rahman, M. A. A. Mahmood, T. Zaman, and M. J. Abedin |
2013 |
Conference |
CME |
Professor Dr. Md. Shamimur Rahman |
| 41 |
Potential Use of the Clay from the Dead River Isamati |
International Conference on Climate Change Impact and Adaptation (I3CIA) Center for Climate Change and Sustainability Research (3CSR) |
M. S. Rahman, M. A. A. Mahmood, and T. Zaman |
2013 |
Conference |
CME |
Professor Dr. Md. Shamimur Rahman |
| 42 |
Comparison of Welding Effect on Tensile Strength and Hardness of Mild Steel and Cast Iron |
International Conference on Mechanical, Industrial and Materials Engineering 2013 (ICMIME2013) |
M. A. A. Mahmood, M. S. Rahman, T. Zaman |
2013 |
Conference |
CME |
Professor Dr. Md. Shamimur Rahman |
| 43 |
Ceramics in Bangladesh: Its Recent Evolution and Future Prospect |
International Conference on Mechanical, Industrial and Materials Engineering (ICMIME-2013) |
M. A. A. Mahmood, M. S. Rahman and Tasmia Zaman |
2013 |
Conference |
CME |
Professor Dr. Md. Shamimur Rahman |
| 44 |
Influence of Heat treatment on Fatigue and Fracture Behavior of Aluminum Alloys |
International Conference on Engineering Research, Innovation and Education (ICERIE-2013) |
Md. Forhad Ibne Al Imam, Md. Shamimur Rahman and Md. Abdullah Al Mahmood |
2013 |
Conference |
CME |
Professor Dr. Md. Shamimur Rahman |
| 45 |
Influence of the Substrate Bias Voltage on Fretting Fatigue Behavior of CrN film Deposited on Ti-6Al-4V Alloy |
International Journal of Modern Physics B, Vol. 25, issue 12, pp. 1567-1576 |
M.S. Rahman, S. Tanimoto, D Yonekura and R. Murakami |
2011 |
Journal |
CME |
Professor Dr. Md. Shamimur Rahman |
| 46 |
Evaluation of Crack Initiation and Fatigue Behavior of CrN film Deposited on Ti-6Al-4V Alloy |
International Journal of Modern Physics B, Vol. 24, Issue15-16(2010), pp. 2502-2506 |
Md. Shamimur Rahman, Takeshi Katsuma, Daisuke Yonekura, Ri-ichi Murakami |
2010 |
Journal |
CME |
Professor Dr. Md. Shamimur Rahman |
| 47 |
Effect of Bias Voltage on Fatigue Behavior of CrN Film Deposited on Ti-6Al-4V Alloy |
2008 ASME International Conference on Manufacturing Science and Engineering (MSEC_ICM&P2008) Paper no-72441, pp. 169-174, October 7-10, Evanston, IL, USA |
Md. Shamimur Rahman, Daisuke Yonekura, Takeshi Katsuma, and Ri-ichi Murakami |
2009 |
Conference |
CME |
Professor Dr. Md. Shamimur Rahman |
| 48 |
Emission Characteristics of a DI Diesel Engine with Bio-fuel |
International Conference on Mechanical Engineering' 2005, (ICME2005) 28-30 December 2005, Dhaka |
M. Shamimur Rahman, M. Rafiqul Alam Beg, and M. Nurun Nabi |
2005 |
Conference |
CME |
Professor Dr. Md. Shamimur Rahman |
| 49 |
Investigation of Exhaust Emission of a DI Diesel Engine with Biodiesel |
5th International Mechanical Engineering Conference and 10th Annual Paper Meet |
M. Shamimur Rahman, M. Rafiqul Alam Beg, and M. Nurun Nabi |
2004 |
Conference |
CME |
Professor Dr. Md. Shamimur Rahman |
| 50 |
Performance Study of A Diesel Engine with Diesel-Vegetable Oil Blends as Alternative Fuel |
2nd BSME-ASME International conference on Thermal Engineering, 2-4 January, 2004, Dhaka |
M.S Rahman, M.N. Nabi, and M.R.A. Beg |
2004 |
Conference |
CME |
Professor Dr. Md. Shamimur Rahman |
| 51 |
Performance Study of A Diesel Engine with Esterified Vegetable Oil |
4th International Mechanical Engineering Conference and 9th Annual Paper Meet, 29-31 December, 2004, Dhaka, Bangladesh |
M.S Rahman, M.R.A. Beg, and M.N. Nabi |
2004 |
Conference |
CME |
Professor Dr. Md. Shamimur Rahman |
| 52 |
Behavior of Diesel Combustion and Exhaust Emission with Neat Diesel Fuel and Diesel-Biodiesel Blends |
SAE International conference, October 27-31, 2004 Paper No. 2004-01-3034, pp. 1-8. USA |
Md. Nurun Nabi, Mhia Md. Zaglul Shahadat , Md. Shamimur Rahman, and Mohd. Rafiqul Alam Beg |
2004 |
Conference |
CME |
Professor Dr. Md. Shamimur Rahman |
| 53 |
Fundamental Properties of Different Vegetable Oils Available in Bangladesh |
SAE International conference, Pittsburgh, Pennsylvania USA, October 27-30, 2003 |
Nurun Nabi, Shamimur Rahman, and Rafiqul Alam Beg |
2003 |
Conference |
CME |
Professor Dr. Md. Shamimur Rahman |
| 54 |
Characterization of Different Vegetable Oils Available in Bangladesh |
3rd International Conference of Mechanical Engineers (ICME) and 8th Annual Paper Meet, 20-22 March, 2003, Dhaka. Paper no. 10, pp. 67-76 |
Md. Nurun Nabi, Md. Shamimur Rahman, Mohd. Rafiqul Alam Beg, Md. Sakhawat Hossain, and Md. Sazzadul Faruki |
2003 |
Conference |
CME |
Professor Dr. Md. Shamimur Rahman |
| 55 |
Improvement in Odor Assessment procedure in DI Diesel Engines |
International conference on Thermal Engineering, 31 December, 2001-2 January 2002, Dhaka, Bangladesh. pp. 544-551 |
Murari Mohon Roy and Md. Shamimur Rahman |
2002 |
Conference |
CME |
Professor Dr. Md. Shamimur Rahman |
| 56 |
Performance Studies on Semi-Adiabatic Diesel Engine Using Vegetable Oil as Fuel |
SAE International conference, San Diego, California USA, October 21-24, 2002. Paper no. 2002-01-2692 |
R.A. Beg, M.S. Rahman, P.K. Bose, and B.B. Ghosh |
2002 |
Conference |
CME |
Professor Dr. Md. Shamimur Rahman |
| 57 |
The effect of organic acids and alcohols on precipitation of phosphate using calcined seashell powder |
Springer International Publishing |
Daniel Pleissner, Tasmia Zaman, Jan Christoph Peinemann |
2020 |
Journal |
CME |
Tasmia Zaman |
| 58 |
Influence of Ba and Mo co-doping on the structural, electrical, magnetic and optical properties of BiFeO3 ceramics |
Materials Research Express |
Aungkan Sen, Md Khalid Hasan, Zahidul Islam, Md Rahat Al Hassan, Tasmia Zaman, MA Matin, Fahmida Gulshan |
2020 |
Journal |
CME |
Tasmia Zaman |
| 59 |
Mono and co-substitution of Sr2+ and Ca2+ on the structural, electrical and optical properties of barium titanate ceramics |
Ceramics International |
Tasmia Zaman, Md Khairul Islam, Md Abdur Rahman, Arman Hussain, Md Abdul Matin, Md Shamimur Rahman |
2019 |
Journal |
CME |
Tasmia Zaman |
| 60 |
Emergence of graphene as a promising anode material for rechargeable batteries: a review |
Materials today chemistry |
MR Al Hassan, A Sen, T Zaman, MS Mostari |
2019 |
Journal |
CME |
Tasmia Zaman |
| 61 |
Evolution and characterization of eggshell as a potential candidate of raw material |
Cerâmica |
T Zaman, Mst Mostari, Md A Al Mahmood, Md S Rahman |
2018 |
Journal |
CME |
Tasmia Zaman |
| 62 |
Study of structural, dielectric and ferroelectric properties of lead-free BaTiO3-K0. 5Na0. 5NbO3 ceramics |
Department of Glass and Ceramic Engineering (G & CE) |
Tasmia Zaman |
2016 |
Book |
CME |
Tasmia Zaman |
| 63 |
Axisymmetric defect originated Al–CFRP interface thermo-elastic fracture study of type-III composite vessel and inverse identification of cohesive zone parameters |
Mechanics of Advanced Materials and Structures, Taylor & Francis |
Md Rahat Al Hassan, Yoshio Arai, Yuzuki Miyakawa, Wakako Araki, Akimoto Kurosawa, Noriyuki Sasaki, Tomoyuki Ohbuchi & Takafumi Iijima |
2024 |
Journal |
CME |
Dr. Md. Rahat Al Hassan |
| 64 |
Investigating the Debonding of Aluminum and Carbon Fiber Reinforced Polymer (Al-CFRP) in Type-III Filament-Wound Composite Vessels Subject to Temperature Variations |
Materials Science Forum, Trans Tech Publications Ltd. |
Md Rahat Al Hassan, Yoshio Arai, Yuzuki Miyakawa, Wakako Araki, Akimoto Kurosawa, Noriyuki Sasaki, Tomoyuki Ohbuchi, Takafumi Iijima |
2024 |
Journal |
CME |
Dr. Md. Rahat Al Hassan |
| 65 |
Evaluation of crack propagation at CFRP/Al interface in composite pressure vessels subjected to temperature change |
JSME |
Yuzuki Miyakawa, Md Rahat Al Hassan, Yoshio Arai,Wakako Araki, Akimoto Kurosawa, Noriyuki Sasaki, Tomoyuki Ohbuchi and Takafumi Iijima. |
2023 |
Conference |
CME |
Dr. Md. Rahat Al Hassan |
| 66 |
Synthesis of spray deposited transition metals doped (Cr, Mn, Fe, Ni, and Cu) compositionally complex ZnO thin films with enhanced band gap and magnetism |
Results in Materials; Volume 13, March 2022, 100263 (Elsevier) |
M.R. Al Hassan, Asrafuzzaman, M.A. Islam, K. Salam, K.F. Amin, M.K. Hasan |
2022 |
Journal |
CME |
Dr. Md. Rahat Al Hassan |
| 67 |
Structural, Morphological and Optical Properties of Spray Deposited Multi-doped (Ba, Sr, Mn, Fe and Ni) Compositionally Complex ZnO Thin Films |
American Journal of Nanosciences Volume 7, Issue 1, March 2021, Pages: 6-14 |
Mohammad Rahat Al Hassan, Aungkan Sen, Mohammad Khalid Hasan , Mohammad Abdul Matin |
2021 |
Journal |
CME |
Dr. Md. Rahat Al Hassan |
| 68 |
Influence of Ba2+ and Mo6+ co-doping on the structural, electrical, magnetic and optical properties of BiFeO3 ceramics |
Mater. Res. Express7 ( 2020) 016312. IOP Publishing |
A. Sen, K. Hasan, J. Islam, M.R.Al Hassan, T. Zaman, M.A. Matin, F. Gulshan |
2020 |
Journal |
CME |
Dr. Md. Rahat Al Hassan |
| 69 |
Structural, optical, and magnetic properties of compositionally complex bismuth ferrite (BiFeO3) |
Springer Science+Business Media, LLC, part of Springer Nature 2020 |
Aungkan Sen* , Md Khalid Hasan, Ahsan Habib Munna, Dev Jyoti Roy , Md Rahat Al Hassan, and Fahmida Gulshan |
2020 |
Journal |
CME |
Dr. Md. Rahat Al Hassan |
| 70 |
INVESTIGATION OF STRUCTURAL AND MORPHOLOGICAL PROPERTIES OF DISTORTED MONOCLINIC HEMATITE NANOPARTICLES |
ICMERE2019-PI-063, Chittagong, Bangladesh |
Md. Khairul Islam , Md. Rahat Al Hassan , Aungkan Sen |
2019 |
Conference |
CME |
Dr. Md. Rahat Al Hassan |
| 71 |
Emergence of Graphene as a Promising Anode Material for Rechargeable Batteries: A Review |
Materials Today Chemistry, Volume 11, March 2019, Pages 225 -243. Elsevier |
M.R. Al Hassan, A. Sen, T. Zaman, M. S. Mostari |
2019 |
Journal |
CME |
Dr. Md. Rahat Al Hassan |
| 72 |
Investigation on the feasibility of Padma Sand & Glass Cullet as potential raw materials of conventional Soda-Lime glass |
ICMIME |
J. Sumona, G. M. Neon, M.R.Al Hassan, Asrafuzzaman, A. Sen |
2019 |
Conference |
CME |
Dr. Md. Rahat Al Hassan |
| 73 |
"Synthesis and Characterization of Porcelain Body Developed from Rice Husk Ash." |
IJE TRANSACTIONS A: Basics Vol. 31, No. 1, January 2018, 25-31. |
S. Mostari, T. Zaman, Aungkan Sen, M. R. Al Hassan |
2018 |
Journal |
CME |
Dr. Md. Rahat Al Hassan |
| 74 |
Graphene: A Review on its Research Trends and Synthesis Techniques. |
ICMERE-2017, 18 – 20 December, Chittagong, Bangladesh |
Aungkan Sen, Md. Rahat Al Hassan, Fazlur Rashid, |
2017 |
Conference |
CME |
Dr. Md. Rahat Al Hassan |
| 75 |
Study of off-eutectic Zn–xMg high temperature solder alloys. |
Journal of Materials Science: Materials in Electronics, 27(8), 8734-8744. Springer |
Galib, R. H., Al Hasan, R., & Sharif, A. |
2016 |
Journal |
CME |
Dr. Md. Rahat Al Hassan |
| 76 |
An insightful observation concerning the effects of co-doping with Zn and Sn on the magnetic and non-linear optical response of CdO thin films |
Physica B: Condensed Matter Volume 706, 1 June 2025, 417163 |
Maruf Hassan Nishat, Md. Kamruzzaman, Md. Mintu Ali, Md. Abdus Sattar |
2025 |
Journal |
CME |
Md. Mintu Ali |
| 77 |
Colocasia esculenta leaf extracted cobalt oxide nanoparticles: A comprehensive investigation of the microstructural, morphological, antibacterial, and photocatalytic activity |
Next Nanotechnology Volume 8, 2025, 100215 |
Md. Estabrak Ahammod Sakib, Md. Lael Hasan, Hridoy Roy, Md. Mahfujul Hasan, Md. Mintu Ali |
2025 |
Journal |
CME |
Md. Mintu Ali |
| 78 |
Study of Cadmium (Cd) Incorporated Amorphous Tin Oxide (SnO2) Thin Film; An Approach of Investigating Microstructural, Morphological and Optical Properties. |
8th International Conference on Engineering Research, Innovation and Education 2025 (ICERIE 2025) School of Applied Sciences and Technology Shahjalal University of Science and Technology, Sylhet |
Mustafa Nafis Jahangir, Fahim Shariar, Md. Minhajul Islam1, Md. Mahfujul Hasan, Md. Humayan Kabir, Md. Mintu Ali |
2025 |
Conference |
CME |
Md. Mintu Ali |
| 79 |
Optimizing Ceramic Body Properties with a Waste Blend of Sugarcane Bagasse and Coconut Shell Ash |
8th International Conference on Engineering Research, Innovation and Education 2025 (ICERIE 2025) School of Applied Sciences and Technology Shahjalal University of Science and Technology, Sylhet |
Md. Estabrak Ahammod Sakib, Md. Lael Hasan, Md. Farhan Muskan, Hridoy Roy, Hasibur Rahman Naim, Md. Mintu Ali |
2025 |
Conference |
CME |
Md. Mintu Ali |
| 80 |
Effect of Calcined Wastage Materials (Clam shell, Animal bone) on the Mechanical Properties of Artificial Ceramic Teeth |
RUEC 1st International Research Conference 2025, Rajshahi University Education Club |
Sifatullah Sharon, Md. Parvej Mosaraf Sohel, Showvik Saha, Joyanto Saha Joy, Md. Mintu Ali |
2025 |
Conference |
CME |
Md. Mintu Ali |
| 81 |
Exploration of optical and frequency dependent electrical properties of boron-cobalt co-doped ZnO thin films |
Optical Materials Volume 148, February 2024, 114949 |
Md. Mintu Ali, M. Humayan Kabir, Md. Shamimur Rahman |
2024 |
Journal |
CME |
Md. Mintu Ali |
| 82 |
Insights into the consequence of (Al–Zn) dual-doping on structural, morphological, and optoelectrical properties of CdO thin films |
Heliyon Volume 10, Issue 4, 29 February 2024, e26545 |
M Ashikul Haque Naeem, Ahmed Sidrat Rahman Ayon, Md. Mintu Ali, Md. Ruhul Amin, M. Humayan Kabir, Md. Abdus Sattar, Samia Tabassum, Md Nurul Huda Liton |
2024 |
Journal |
CME |
Md. Mintu Ali |
| 83 |
Investigation OfThe Effect Of Gallium (Ga) On Properties Of Zinc Oxide (ZnO) Thin Films Prepared By Spray Pyrolysis Technique |
Journal of Optics, March 2024 |
Munjar Hafiz, M. Humayan Kabir, Suhanur Rahman, M. M. Rashid, Md. Saifur Rahman, Habibur Rahman, M. Mintu Ali, M. Jahidul Haque & M. S. Rahman |
2024 |
Journal |
CME |
Md. Mintu Ali |
| 84 |
Influence of multi-doping (Zn and Sn) on the optical, and electrical properties of spray-deposited CdO thin films |
Physica B: Condensed Matter Volume 690, 1 October 2024, 416270 |
Md. Kamruzzaman, Maruf Hassan Nishat, Md. Mintu Ali, M. Humayan Kabir, M S Rahman |
2024 |
Journal |
CME |
Md. Mintu Ali |
| 85 |
Effect of Ga doping on structural, morphological, optical and electrical properties of CuO thin films deposited by spray pyrolysis technique |
Mater Sci: Mater Electron 34, 1258 (2023) |
M. Humayan Kabir, Munjar Hafiz, Suhanur Rahman, Md. Saifur Rahman, Habibur Rahman, M. M. Rashid, Md. Faruk Hossain, M. Mintu Ali, M. Jahidul Haque, M. K. R. Khan & M. S. Rahman |
2023 |
Journal |
CME |
Md. Mintu Ali |
| 86 |
An approach to investigate the structural, morphological, and optical properties of spray pyrolyzed B and Mg co-doped ZnO thin films |
Results in Materials, 100409 |
Bashir Ahmed Johan, Md Mintu Ali, Md Md Jahidul Haque, Md Humayan Kabir, Subhro Roy, Md Shohan Ali |
2023 |
Journal |
CME |
Md. Mintu Ali |
| 87 |
An investigation and study of the morphology, optical and electrical properties of Cobalt doped Boron-Zinc Oxide thin films |
7th International Conference on Mechanical Engineering and Renewable Energy 2023 (ICMERE2023) 16-18 November 2023,Chattogram, Bangladesh |
Md. Mintu Ali, Md. Jahidul Haque, M. Humayan Kabir, Md. Shamimur Rahman |
2023 |
Conference |
CME |
Md. Mintu Ali |
| 88 |
Advanced Nanomaterials for Dentistry, Sustainable Nanomaterials for Biosystem Engineering Impacts, Challenges, and Future Prospects |
Apple Academic Press & CRC Press (Tailor & Francis Group), ISBN: 9781774910665 |
Md. Jahidul Haque, Ahsan Habib Munna, Ahmed Sidrat Rahman Ayon, Zarin Rafa Shaitee, Sanzana Tabassum Proma, Sadia Akter, Tasnuva Humaira, Humayan Kabir, Mintu Ali, Abdul Kaiyum, and Shamimur Rahman |
2022 |
Book Chapter |
CME |
Md. Mintu Ali |
| 89 |
Usage of Bionanomaterials in Production of Solar Energy |
Apple Academic Press & CRC Press (Tailor & Francis Group), ISBN: 9781774912010 |
Md. Jahidul Haque, Zahidul Islam, Ahmed Sidrat Rahman Ayon, Akib Jabed, Zarin Rafa Shaitee, Sanzana Tabassum Proma, Mst. Esmotara Begum, M. Humayan Kabir, M. Mintu Ali, M. Abdul Kaiyum, and M. S. Rahman |
2022 |
Book |
CME |
Md. Mintu Ali |
| 90 |
A Prospective Review on Dense and High Ionic Conductivity of LSGM Electrolytes Sintered at Lower Temperature through Different Routes |
4th International Conference on Physics for Sustainable Development and Technology (ICPSDT-2022), 22-23 January 2022, Department of Physics, CUET, Chattogram-4349, Bangladesh |
M. Mintu Ali, Md. Jahidul Haque, Md. Zahurul Islam, M S Rahman |
2022 |
Conference |
CME |
Md. Mintu Ali |
| 91 |
A Comprehensive Review Regarding the Technological Development of ZnO Thin Films From 2018 To 2021 |
4th International Conference on Physics for Sustainable Development and Technology (ICPSDT-2022), 22-23 January 2022, Department of Physics, CUET, Chattogram-4349, Bangladesh |
M. Mintu Ali, Md. Jahidul Haque, Subhro Roy, Md. Nafiul Islam Sarker, Ariful Bari Rifat, Showvik Saha, M. Humayan Kabir, M S Rahman |
2022 |
Conference |
CME |
Md. Mintu Ali |
| 92 |
Effect of Ga doping on microstructure, morphology, optical and electrical properties of spray deposited CdO thin films |
Optical Materials Volume 125, March 2022, 112123 |
M Humayan Kabir, Munjar Hafiz, Shamima Akhter Urmi, M Jahidul Haque, M Mintu Ali, Md Saifur Rahman, MKR Khan, MS Rahman |
2022 |
Journal |
CME |
Md. Mintu Ali |
| 93 |
Nano synthesis of ZnO–TiO2 composites by sol-gel method and evaluation of their antibacterial, optical and photocatalytic activities |
Results in Materials 11 (2021) 100199 |
M Mintu Ali, Md. Jahidul Haque, M. Humayan Kabir, M. Abdul Kaiyum, M.S. Rahman |
2021 |
Journal |
CME |
Md. Mintu Ali |
| 94 |
Structural, electrical, and magnetic characterization of (1-x)BaTiO3-x Ni0.6Zn0.4Fe2O4 multiferroic ceramic composites |
Materials Engineering Research, Vol. 3, Issue 1 |
Golam Mowla, Nabid Hossain, M. Humayan Kabir, M. Jahidul Haque, M. Mintu Ali, M. Abdul Kaiyum, M. S. Rahman |
2021 |
Journal |
CME |
Md. Mintu Ali |
| 95 |
Effects of Iron Doping on Properties of TiO2 Thin Film Prepared by Spin Coating Method |
Journal of Surface Investigation: X-ray, Synchrotron and Neutron Techniques volume 15, pages1225–1231 (2021) |
M. Abdul Kaiyum, M. Humayan Kabir, M. Mintu Ali & M. Shamimur Rahman |
2021 |
Journal |
CME |
Md. Mintu Ali |
| 96 |
Effects of Binder on Physical and Mechanical Properties on Unglazed Ceramic Tiles |
Journal of Engineering and Applied Science Vol. 4, No. 1, pp. 42–51, June 2020 |
M. Mintu Ali, M Nion, M S Rahman |
2020 |
Journal |
CME |
Md. Mintu Ali |
| 97 |
Physio-Mechanical behavior of different types of local and imported clays as a raw material used in traditional ceramic body preparation |
International Conference on Materials, Energy, Environment and Engineering (ICMEEE 2020)” 29 -30 November, 2020, Department of Chemical Engineering, Jashore University of Science and Technology (JUST), Jashore- 7408 |
Md. Mintu Ali, B.A.Johan, M. Shohan Ali, M. Humayan Kabir, M.A. Kaiyum, M. Khairul Islam, M.S Rahman |
2020 |
Conference |
CME |
Md. Mintu Ali |
| 98 |
Preparation and Characterization of Activated Carbon from Tea Waste by Chemical Activation Method |
International Conference on Materials, Energy, Environment and Engineering (ICMEEE 2020)” 29 -30 November, 2020, Department of Chemical Engineering, Jashore University of Science and Technology (JUST), Jashore- 7408 |
Md. Khairul Islam, Md. Rayhan Chawdhuri, Shamima Akhtar Urmi, Md. Mintu Ali, Md. Humayun Kabir, Md. Abdul Kaiyum |
2020 |
Conference |
CME |
Md. Mintu Ali |
| 99 |
Effect of annealing temperature on structural morphological and optical properties of spray pyrolized Al-doped ZnO thin films |
Journal of Physics Communications |
M Humayan Kabir, M Mintu Ali, M Abdul Kaiyum and M S Rahman |
2019 |
Journal |
CME |
Md. Mintu Ali |
| 100 |
Enhancement of Fatigue Behavior of PVD Coated Ceramic Thin Film Deposited on Titanium Alloy |
International Conference on Mechanical, Industrial and Materials Engineering 2019 (ICMIME2019) 17-19 December, 2019, RUET, Rajshahi, Bangladesh. |
Md. Shamimur Rahman, Md. Abdul Kaiyum, Md. Mintu Ali |
2019 |
Conference |
CME |
Md. Mintu Ali |
| 101 |
EFFECTS OF WASTE MATERIALS ON PHYSICAL AND MECHANICAL PROPERTIES OF BRICK |
International Conference on Mechanical Engineering and Renewable Energy 2019 (ICMERE2019) 11 – 13 December, 2019, Chittagong, Bangladesh |
M A Kaiyum, M Mintu Ali, and M Humayan Kabir |
2019 |
Conference |
CME |
Md. Mintu Ali |
| 102 |
Locally available Clays of Bangladesh as a Replacement of imported Clays for Ceramic Industries |
Advanced Materials Letters |
Md. Masum Akanda, Avijit Mallik, Asif Bin Karim, Md. Mintu Ali |
2019 |
Journal |
CME |
Md. Mintu Ali |
| 103 |
Green synthesis and characterization of silver nanoparticles from Nigella sativa L seeds and It’s against human pathogenic bacteria and fungi |
The Microbe Volume 4, September 2024, 100111 |
Jannatul Ferdous, M. Mizanur Rahman ..., M. Humayan Kabir |
2024 |
Journal |
CME |
Md. Humayan Kabir |
| 104 |
Exploration of optical and frequency dependent electrical properties of boron-cobalt co-doped ZnO thin films |
Optical Materials Volume 148, February 2024, 114949 |
Md. Mintu Ali, M. Humayan Kabir, Md. Shamimur Rahman |
2024 |
Journal |
CME |
Md. Humayan Kabir |
| 105 |
Insights into the consequence of (Al–Zn) dual-doping on structural, morphological, and optoelectrical properties of CdO thin films |
Heliyon 10 (2024) e26545 |
M Ashikul Haque Naeemaeem, ...Md. Mintu Ali, M. Humayan Kabir |
2024 |
Journal |
CME |
Md. Humayan Kabir |
| 106 |
Investigation OfThe Effect Of Gallium (Ga) On Properties Of Zinc Oxide (ZnO) Thin Films Prepared By Spray Pyrolysis Technique |
Journal of Optics, Springer Nature |
Munjar Hafiz, M. Humayan Kabir, Suhanur Rahman, M. M. Rashid, Md. Saifur Rahman, Habibur Rahman, M. Mintu Ali, M. Jahidul Haque & M. S. Rahman |
2024 |
Journal |
CME |
Md. Humayan Kabir |
| 107 |
Influence of multi-doping (Zn and Sn) on the optical, and electrical properties of spray-deposited CdO thin films |
Physica B: Condensed Matter Volume 690, 1 October 2024, 416270 |
Md. Kamruzzaman, Maruf Hassan Nishat, Md. Mintu Ali, M. Humayan Kabir, M S Rahman |
2024 |
Journal |
CME |
Md. Humayan Kabir |
| 108 |
Usage of Bionanomaterials in Production of Solar Energy |
Apple Academic Press & CRC Press (Tailor & Francis Group), ISBN: 9781774912010 |
Md. Jahidul Haque, Zahidul Islam, Ahmed Sidrat Rahman Ayon, Akib Jabed, Zarin Rafa Shaitee, Sanzana Tabassum Proma, Mst. Esmotara Begum, M. Humayan Kabir, M. Mintu Ali, M. Abdul Kaiyum, and M. S. Rahman |
2023 |
Book |
CME |
Md. Humayan Kabir |
| 109 |
Effect of Ga doping on structural, morphological, optical and electrical properties of CuO thin films deposited by spray pyrolysis technique |
Mater Sci: Mater Electron 34, 1258 (2023) |
M. Humayan Kabir, Munjar Hafiz, Suhanur Rahman, Md. Saifur Rahman, Habibur Rahman, M. M. Rashid, Md. Faruk Hossain, M. Mintu Ali, M. Jahidul Haque, M. K. R. Khan & M. S. Rahman |
2023 |
Journal |
CME |
Md. Humayan Kabir |
| 110 |
An approach to investigate the structural, morphological, and optical properties of spray pyrolyzed B and Mg co-doped ZnO thin films |
Results in Materials, 100409 |
Bashir Ahmed Johan, Md Mintu Ali, Md Md Jahidul Haque, Md Humayan Kabir, Subhro Roy, Md Shohan Ali |
2023 |
Journal |
CME |
Md. Humayan Kabir |
| 111 |
Advanced Nanomaterials for Dentistry, Sustainable Nanomaterials for Biosystem Engineering Impacts, Challenges, and Future Prospects |
Apple Academic Press & CRC Press (Tailor & Francis Group), ISBN: 9781774910665 |
Md. Jahidul Haque, Ahsan Habib Munna, Ahmed Sidrat Rahman Ayon, Zarin Rafa Shaitee, Sanzana Tabassum Proma, Sadia Akter, Tasnuva Humaira, Humayan Kabir, Mintu Ali, Abdul Kaiyum, and Shamimur Rahman |
2022 |
Book Chapter |
CME |
Md. Humayan Kabir |
| 112 |
Effect of Ga doping on microstructure, morphology, optical and electrical properties of spray deposited CdO thin films |
Optical Materials Volume 125, March 2022, 112123 |
M Humayan Kabir, Munjar Hafiz, Shamima Akhter Urmi, M Jahidul Haque, M Mintu Ali, Md Saifur Rahman, MKR Khan, MS Rahman |
2022 |
Journal |
CME |
Md. Humayan Kabir |
| 113 |
Effect of Sr doping on structural, morphological, optical and electrical properties of spray pyrolized CdO thin films |
Journal of Materials Science: Materials in Electronics |
M. Humayan Kabir, Antara Bhattacharjee, M. Manjorul Islam, M. S. Rahman, Md. Saifur Rahman & M. K. R. Khan |
2021 |
Journal |
CME |
Md. Humayan Kabir |
| 114 |
Nano synthesis of ZnO–TiO2 composites by sol-gel method and evaluation of their antibacterial, optical and photocatalytic activities |
Results in Materials (Elsevier), Volume 11, September 2021, 100199 |
M Mintu Ali, Md. Jahidul Haque, M. Humayan Kabir, M. Abdul Kaiyum and M.S. Rahman |
2021 |
Journal |
CME |
Md. Humayan Kabir |
| 115 |
Structural, electrical, and magnetic characterization of (1-x)BaTiO3-x Ni0.6Zn0.4Fe2O4 multiferroic ceramic composites |
Materials Engineering Research |
Golam Mowla, Nabid Hossain, M Humayan Kabir, M Jahidul Haque, M Mintu Ali, M Abdul Kaiyum, MS Rahman |
2021 |
Journal |
CME |
Md. Humayan Kabir |
| 116 |
Effect of Al doping on morphology and optical properties of spray pyrolized MgO thin films |
Results in Materials (Elsevier), Volume 11, September 2021, 100199 |
M.Golam Mortuza Nion, M. Humayan Kabir, Marjanun AkterMona, M. Jahidul Haque, Nayem Shahariar, MunjarHafiz and M.S.Rahman |
2021 |
Journal |
CME |
Md. Humayan Kabir |
| 117 |
Effects of Iron Doping on Properties of TiO2 Thin Film Prepared by Spin Coating Method |
Journal of Surface Investigation X-ray Synchrotron and Neutron Techniques 15(6):1225-1231 |
M. Abdul Kaiyum, M. Humayan Kabir, Md. Mintu Ali, M. Shamimur Rahman |
2021 |
Journal |
CME |
Md. Humayan Kabir |
| 118 |
Effect of annealing temperature on structural morphological and optical properties of spray pyrolized Al-doped ZnO thin films |
Journal of Physics Communications 3 (10), 105007 |
M Humayan Kabir, M Mintu Ali, M Abdul Kaiyum and M S Rahman |
2019 |
Journal |
CME |
Md. Humayan Kabir |
| 119 |
Effect of Annealing on Physio-Optical Properties of ZnO Thin Films Prepared by Spray Pyrolysis Technique |
5th International Conference on Engineering Research, Innovation and Education (ICERIE 2019) |
M.Humayan Kabir, M N A Chowdhury and M.S.Rahman |
2019 |
Conference |
CME |
Md. Humayan Kabir |
| 120 |
EFFECTS OF WASTE MATERIALS ON PHYSICAL AND MECHANICAL PROPERTIES OF BRICK |
International Conference on Mechanical Engineering and Renewable Energy 2019 |
M A Kaiyum, M Mintu Ali, and M Humayan Kabir |
2019 |
Conference |
CME |
Md. Humayan Kabir |
| 121 |
Influence of Al doping on microstructure, morphology, optical and photoluminescence properties of pyrolytic ZnO thin films prepared in an ambient atmosphere |
Chinese journal of physics 56 (5), 2275-2284 |
M.Humayan Kabir, M.Al amin, M.S.Rahman and M.K.R.Khan |
2018 |
Journal |
CME |
Md. Humayan Kabir |
| 122 |
The prospect of spray pyrolyzed pure, Mn-doped, and Zn-doped nickel oxide thin films as TCO material |
Heliyon, vol. 10, no. 1, p. e24244 |
M. Esmotara Begum, M. Bodiul Islam, M. Hosne Ara, Anannya Doris, M. Abdul Kaiyum, Md. Rasadujjaman |
2024 |
Journal |
CME |
Mst. Esmotara Begum |
| 123 |
Biosynthesis and Characterization of TiO2 Nanoparticles Using Allium Sativum Peel Extract with Detailed Optical Properties |
International Conference on Innovations in Science, Engineering and Technology 2024 (ICISET 2024) |
Abdullah Al Moyeen, Sondip Ghosh, Orchi Datta, Raiyana Mashfiqua Mahmud, Md Yamin Sarker, Md. Manwar Hossain, Mst. Esmotara Begum |
2024 |
Conference |
CME |
Mst. Esmotara Begum |
| 124 |
Investigation of structural, optical, antibacterial, and dielectric properties of sol-gel and biosynthesized TiO2 nanoparticles |
Heliyon, Volume 10, Issue 23, e40776 |
Abdullah Al Moyeen, Raiyana Mashfiqua Mahmud, Durjoy Datta Mazumder, Sondip Ghosh, Orchi Datta, Anik Molla, Mst. Esmotara Begum |
2024 |
Journal |
CME |
Mst. Esmotara Begum |
| 125 |
Structural, morphological and optical characterizations of spray pyrolyzed nickel oxide thin films |
Results in Materials, Volume 14, 100265 |
M. Esmotara Begum, M.N.A. Chowdhury, M. Bodiul Islam |
2022 |
Journal |
CME |
Mst. Esmotara Begum |
| 126 |
Effect of Zinc Doping on the Properties of Nickel Oxide Films |
Paper ID: 162, 5th International Conference on Mechanical, Industrial and Materials Engineering 2022 (ICMIME 2022) |
Mst. Esmotara Begum, Md. Bodiul Islam |
2022 |
Conference |
CME |
Mst. Esmotara Begum |
| 127 |
Usage of Bionanomaterials in Production of Solar Energy |
Apple Academic Press & CRC Press (Tailor & Francis Group), ISBN: 9781774912010 |
Md. Jahidul Haque, Zahidul Islam, Ahmed Sidrat Rahman Ayon, Akib Jabed, Zarin Rafa Shaitee, Sanzana Tabassum Proma, Mst. Esmotara Begum, M. Humayan Kabir, M. Mintu Ali, M. Abdul Kaiyum, and M. S. Rahman |
2022 |
Book Chapter |
CME |
Mst. Esmotara Begum |
| 128 |
A progressive overview of the mainstream additive manufacturing of ceramic components for industrial advancement |
Materials Open Research |
MB Islam, Sumona HJ, MJ Haque, AA Mahmood |
2024 |
Journal |
CME |
Hasnat Jahan Sumona |
| 129 |
Modification of structural, morphological, and dielectric properties of barium calcium titanate ceramics with yttrium addition |
Heliyon, |
Sumona HJ, Al Mahmood A, Islam MB, Kasem |
2024 |
Journal |
CME |
Hasnat Jahan Sumona |
| 130 |
Enhanced Photocatalytic Activity of Metal‐Metal‐Nonmetal Multidoped TiO2 Nanoparticles towards Visible Light |
Chemistry Select |
Khatun MM, Islam MB, Sumona HJ, Al Mahmood A |
2024 |
Journal |
CME |
Hasnat Jahan Sumona |
| 131 |
Investigation of structural, electrical and optical properties of lanthanum and zirconium doped barium titanate ceramics |
Materials Science and Engineering: B |
Sumona HJ, Sultan MS, Urmi SA, Gafur MA |
2023 |
Journal |
CME |
Hasnat Jahan Sumona |
| 132 |
Sol-Gel Synthesis and Characterization of Titanium Dioxide Nanoparticles |
Paper ID: ICMIME2022_070, International Conference on Mechanical, Industrial and Materials Engineering 2022 (ICMIME2022), RUET,Rajshahi-6204, Bangladesh |
Khatun MM, Islam MB, Sumona HJ |
2022 |
Conference |
CME |
Hasnat Jahan Sumona |
| 133 |
Investigation on the feasibility of Padma Sand & Glass Cullet as potential raw materials of conventional Soda-Lime glass. |
International Conference on Material, Industrial & Mechanical Engineering (ICMIME). |
H.J. Sumona, G. M. Neon, A. Sen, M.R.Al Hassan, Asrafuzzaman. |
2019 |
Conference |
CME |
Hasnat Jahan Sumona |
| 134 |
Comprehensive Analysis of Structural Integrity, Surface Morphology, and Optical Properties of Na1/2Y1/2Cu3Ti4O12 Ceramic |
International Conference on Advances in Computing, Communication, Electrical and Smart Systems (iCACCESS 2024), IEEE Explore, Dhaka, Bangladesh |
Md. Khairul Islam, Abdullah Al Moyeen and Raiyana Mashfiqua Mahmud |
2024 |
Conference |
CME |
Md. Khairul Islam |
| 135 |
STUDY OF THE STRUCTURAL AND MORPHOLOGICAL PROPERTIES OF Sr AND Ca CO-DOPED BARIUM TITANATE |
7th International Conference on Mechanical Engineering and Renewable Energy 2023 (ICMERE2023), CUET, Chattogram, Bangladesh |
Md Khairul Islam, Jannatul Ferdous Sugandha, Dipta Sarker and Md Golam Kibria |
2023 |
Conference |
CME |
Md. Khairul Islam |
| 136 |
Fabrication of Lanthanum doped Calcium Copper Titanate (CCTO) Electroceramic for Energy Storage Application |
International Conference on Sustainable Engineering Development (ICSED-2023), DUET, Gazipur, Bangladesh |
Md Khairul Islam, Md Shamimur Rahman, Shamima Akhter Urmi, Abdullah Al Mamun, and Joyen Uddin |
2023 |
Conference |
CME |
Md. Khairul Islam |
| 137 |
Study of the Morphological, Electrical and Optical Properties of Ca4SrCu3Ti4O12 Ceramic. |
7th International Conference on Chemical Engineering (ICChE 2023) 20-22 December 2023, BUET, Dhaka, Bangladesh |
Md Khairul Islam, Md Shamimur Rahman, Shamima Akhter Urmi, Abdullah Al Mamun, and Joyen Uddin |
2023 |
Conference |
CME |
Md. Khairul Islam |
| 138 |
EXPLORATION OF STRUCTURAL AND MAGNETIC PROPERTIES OF NICKEL ZINC FERRITE FABRICATED BY FACILE SOL-GEL METHOD. |
International Conference on Mechanical Engineering and Renewable Energy 2021 (ICMERE 2021), CUET, Chattogram, Bangladesh |
Md. Khairul Islam, Shamima Akhter Urmi, Sangman Dio, Sha Zubaier Alam |
2021 |
Conference |
CME |
Md. Khairul Islam |
| 139 |
Preparation and Characterization of Activated Carbon from Tea Waste by Chemical Activation Method. |
International Conference on Materials, Energy, Environment and Engineering (ICMEEE 2020) |
Md. Khairul Islam, Md. Rayhan Chawdhuri, * Shamima Akhtar Urmi, Md. Mintu Ali, Md. Humayun Kabir, Md. Abdul Kaiyum |
2020 |
Conference |
CME |
Md. Khairul Islam |
| 140 |
Mono and co-substitution of Sr2+ and Ca2+ on the structural, electrical and optical properties of barium titanate ceramics |
Ceramics International Volume 45, Issue 8, 1 June 2019, Pages 10154-10162 |
Tasmia Zaman, Md Khairul Islam, Md Abdur Rahman, Arman Hussain, Md Abdul Matin, Md Shamimur Rahman |
2019 |
Journal |
CME |
Md. Khairul Islam |
| 141 |
Investigation of Structural and Morphological Properties of Distorted Monoclinic Hematite Nanoparticle. |
ICEMERE 2019, CUET, Chittagong |
Md. Khairul Islam, Md Rahat Al Hassan, Aungkan Sen |
2019 |
Conference |
CME |
Md. Khairul Islam |
| 142 |
Manufacturing & Characterization of Glass Samples with Three Different Sources of Silica: Possible Alternatives for Quartz in Glass Manufacturing. |
International Conference on Materials, Energy, Environment and Engineering (ICMEEE)-2020 |
Shamima Akther Urmi , G. M. Sadrul Islam, Mainul Islam , M.S. Rahman |
2020 |
Conference |
CME |
Shamima Akhter Urmi |
| 143 |
Green synthesis of ZnO and Cu-doped ZnO nanoparticles using Aloe vera gel and investigation of their structural, photocatalytic, and antibacterial properties |
Ceramica |
Abdullah Al Mahmood, Nusrat Jahan, Sarah Tabassum, Maariz Rahman, M. Bodiul Islam, Shamimur Rahman, Rumana Hossain |
2025 |
Journal |
CME |
Dr. Md. Abdullah Al Mahmood |
| 144 |
Sustainable transformation of waste Aluminium into high-performance composites: A review |
International Journal of Lightweight Materials and Manufacture |
Abdullah Al Mahmood, Md. Abdul Kader, M. Bodiul Islam, Rumana Hossain |
2025 |
Journal |
CME |
Dr. Md. Abdullah Al Mahmood |
| 145 |
Replacement of CaO by Recycled Bone Ash in Whitewares |
International Conference on Mechanical, Industrial and Materials Engineering 2024 (ICMIME2024) 11-13 December, 2024, RUET, Rajshahi-6204, Bangladesh. |
Abdullah Al Mahmood, Md. Minhajul Islam, Ayaz Rahman Nadib, Md. Bodiul Islam |
2025 |
Conference |
CME |
Dr. Md. Abdullah Al Mahmood |
| 146 |
Structural, morphological, and optical investigation of undoped and nickel doped titanium dioxide thin films |
8th International Conference on Mechanical, Industrial and Energy Engineering 2024 02-04 January, 2025, Khulna, BANGLADESH |
M. Mim Akter, Tanisha Mujib, Abdullah Al Mahmood, M. Bodiul Islam |
2025 |
Conference |
CME |
Dr. Md. Abdullah Al Mahmood |
| 147 |
Synthesis and characterization of SiO2 coated Fe3O4 nanoparticles by co precipitation method |
8th International Conference on Mechanical, Industrial and Energy Engineering 2024 02-04 January, 2025, Khulna, BANGLADESH |
Shamima Akhter Urmi, M. Bodiul Islam, M. Mosiul Haque, M. Sadman Shahriar, Abdullah Al Mahmood |
2025 |
Conference |
CME |
Dr. Md. Abdullah Al Mahmood |
| 148 |
Comparative Environmental Impact Analysis for Natural and Synthetic Fiber Reinforced Composites from a Life Cycle Assessment Context |
8th International Conference on Mechanical, Industrial and Energy Engineering 2024 02-04 January, 2025, Khulna, BANGLADESH |
Md. Sidratul Montaha Hossain, Abdullah Al Mahmood |
2025 |
Conference |
CME |
Dr. Md. Abdullah Al Mahmood |
| 149 |
Utilizing The Waste Snail Shell as a Source of CaO in Whitewares |
WasteSafe 2025- 9th International Conference on Sustainable Solutions for Waste Management in Developing Countries-Rajshahi University |
Md Minjahul Islam, Ayaz Rohman Nadib, Abdullah Al Mahmood, Manwar Hossain |
2025 |
Conference |
CME |
Dr. Md. Abdullah Al Mahmood |
| 150 |
Life Cycle Assessment of Conventional and Alternative Methods for Aluminium Extraction from Lithium-Ion Batteries |
International Conference on Emerging Technologies for Sustainable Development (ICETSD) 2025-JUST-Jessore |
Md. Eftakhar Ahmed, Tahmid Islam Siyam, Abdullah Al Mahmood, M Bodiul Islam, Md. Sidratul Montaha Hossain |
2025 |
Conference |
CME |
Dr. Md. Abdullah Al Mahmood |
| 151 |
Experimental Comparison of Reverse Osmosis, Household Filters, and Hybrid Filtration Systems for Removing Heavy Metals and Microbial Pathogens |
8th International Conference on Engineering Research, Innovation and Education School of Applied sciences & Technology, SUST, Sylhet |
Ashraf Islam Ashfaq, Most Mobassara Jannat, Abdullah Al Mahmood |
2025 |
Conference |
CME |
Dr. Md. Abdullah Al Mahmood |
| 152 |
Tailoring the structural and optical properties of TiO2 thin films: A study of undoped, N-doped, and Fe-doped variants via sol-gel spin coating |
Next Materials |
Sondip Ghosh, Shrabonti Saha, Abdullah Al Moyeen, Abdullah Al Mahmood, M. Bodiul Islam |
2025 |
Journal |
CME |
Dr. Md. Abdullah Al Mahmood |
| 153 |
Synthesis of Activated Carbon from Wood Apple Shells for Heavy Metal Removal in Wastewater Treatment |
3rd International Conference on Mechanical Engineering and Applied Sciences, (ICMEAS), MIST, DHAKA |
M.S. Montaha Hossain, R. Islam, S. Al Magfur, Z.M.T. Al Hossain, M.B. Islam, Abdullah Al Mahmood |
2025 |
Conference |
CME |
Dr. Md. Abdullah Al Mahmood |
| 154 |
Synthesis and Characterization of Selective Surface Coating Using Copper(II) Nitrate and Aluminum Nitrate Solutions |
3rd International Conference on Mechanical Engineering and Applied Sciences, MIST, Dhaka |
M.S. Montaha Hossain, S. Ahmed, M. jannat Rownok, M.B. Islam, Abdullah Al Mahmood |
2025 |
Conference |
CME |
Dr. Md. Abdullah Al Mahmood |
| 155 |
Design and Evaluation of a Sustainable Hybrid Solar Thermal System for Efficient Drying Applications |
RUEC 1st International Research Conference- RU |
Abdullah Al Mahmood, M.A. Alam, M.S. Montaha Hossain, M. Roni, M.B. Islam |
2025 |
Conference |
CME |
Dr. Md. Abdullah Al Mahmood |
| 156 |
Production of abrasive materials recycled from glass cullet and snail shell |
Waste Management Bulletin, ELSEVIER |
M. Bodiul Islam, M.A. Muhtasim Dian, N. Alamgir Riya, Abdullah Al Mahmood |
2024 |
Journal |
CME |
Dr. Md. Abdullah Al Mahmood |
| 157 |
Enhanced Photocatalytic Activity of Metal-Metal-Nonmetal Multidoped TiO2 Nanoparticles towards Visible Light |
Chemistry Select (Wiley-VCH GmbH) |
M. Mahfuza Khatun, M. Bodiul Islam, Hasnat Jahan Sumona, and Abdullah Al Mahmood |
2024 |
Journal |
CME |
Dr. Md. Abdullah Al Mahmood |
| 158 |
Modification of structural, morphological, and dielectric properties of barium calcium titanate ceramics with yttrium addition |
Heliyon- Elsevier- |
Hasnat Jahan Sumona, Abdullah Al Mahmood, M Bodiul Islam, Jahid Hasan Kasem, MS Rahman |
2024 |
Journal |
CME |
Dr. Md. Abdullah Al Mahmood |
| 159 |
Comparative Analysis of Environmental Impacts Caused by the Natural Fiber Reinforced Composites: A Life Cycle Assessment (LCA) Approach |
BCSIR Congress 2023 |
Abdullah Al Mahmood, Md. Sidratul Montaha Hossain, and Md. Wahidur Rashid |
2024 |
Conference |
CME |
Dr. Md. Abdullah Al Mahmood |
| 160 |
Enhanced photocatalytic activity of Cr-doped CaTiO3 particles synthesized by solid state reaction route |
Springer |
MB Islam, S Islam, MS Islam, MM Hossain, M-A Rahman, Abdullah Al Mahmood |
2024 |
Journal |
CME |
Dr. Md. Abdullah Al Mahmood |
| 161 |
Structural, morphological, optical, and antimicrobial study of Mikania micrantha (leaf) extract treated zinc doped cobalt ferrite nanoparticles and antibacterial clothing applications |
Results in Surfaces and Interfaces (ELSEVIER) |
Abdullah Al Mahmood, Shaadnan Bin Syed, Zahid Hasan, M. Bodiul Islam, Rumana Hossain, Shamimur Rahman |
2024 |
Journal |
CME |
Dr. Md. Abdullah Al Mahmood |
| 162 |
Effect of TiO2 as sintering additive on microstructural, physical, and mechanical properties of CeO2 doped zirconia toughened alumina ceramic composite |
Ceramics International, ELSEVIER |
Md. Bakhtierkhalzi, Md. Wahedul Islam, Md. Suzauddin, Md. Nurul Islam, Abdullah Al Mahmood |
2023 |
Journal |
CME |
Dr. Md. Abdullah Al Mahmood |
| 163 |
Determination of Environmental Impacts of Natural Fiber Reinforced Composites by Life Cycle Assessment (LCA) Tool |
International Conference on Mechanical Engineering and Renewable Energy 2023 (ICMERE2023), Chittagong University of Engineering & Technology (CUET) |
Abdullah Al Mahmood, Md. Sidratul Montaha Hossain, and Md. Wahidur Rashid |
2023 |
Conference |
CME |
Dr. Md. Abdullah Al Mahmood |
| 164 |
Value-added fabrication of NiO-doped CuO nanoflakes from waste flexible printed circuit board for advanced photocatalytic application |
Nature Publishing Group- Scientific Reports |
Rumana Hossain, Rasoul Khayyam Nekouei, Abdullah Al Mahmood, Veena Sahajwalla |
2022 |
Journal |
CME |
Dr. Md. Abdullah Al Mahmood |
| 165 |
The effect of Mg doping in ZnTiO3 and Zn(1-x)MgxTiO3 ceramics |
BCSIR-Congrss-2022 (Bangladesh Council of Scientific and Industrial Research) |
Abdullah Al Mahmood, Shadman Hoque, Md. Mohibul Alam |
2022 |
Conference |
CME |
Dr. Md. Abdullah Al Mahmood |
| 166 |
Rapid transformation of the metal-polymer laminated packaging materials into ceramic carbide reinforced Al-alloy |
ELSEVIER-Resources, Conservation & Recycling |
Abdullah Al Mahmood, Rumana Hossain, Saroj Bhattacharyya, Karen Privat, Veena Sahajwalla |
2021 |
Journal |
CME |
Dr. Md. Abdullah Al Mahmood |
| 167 |
Recovering renewable carbon materials from automotive shredder residue (ASR) for micro-supercapacitor electrodes |
Elsevier- Journal of Cleaner Production |
Rumana Hossain, Abdullah Al Mahmood, Veena Sahajwalla |
2021 |
Journal |
CME |
Dr. Md. Abdullah Al Mahmood |
| 168 |
Facile Solution for Recycling Hazardous Flexible Plastic-Laminated Metal Packaging Waste To Produce Value-Added Metal Alloys |
American Chemical Society- ACS Sustainable Chemistry & Engineering |
Rumana Hossain, Abdullah Al Mahmood, Veena Sahajwalla |
2021 |
Journal |
CME |
Dr. Md. Abdullah Al Mahmood |
| 169 |
Recycling of polymer laminated aluminum packaging (PLAP) materials into carbonaceous metallic microparticles |
ELSEVIER- Journal of Cleaner Production |
Abdullah Al Mahmood, Rumana Hossain, Saroj Bhattacharyya, and Veena Sahajwalla |
2020 |
Journal |
CME |
Dr. Md. Abdullah Al Mahmood |
| 170 |
Thermal Disengagement Technology: the Perspective of Microrecycling of Polymer-metal Multilayer Packaging Materials |
2020 TMS Annual Meeting & Exhibition |
Abdullah Al Mahmood, Rumana Hossain, and Veena Sahajwalla |
2020 |
Conference |
CME |
Dr. Md. Abdullah Al Mahmood |
| 171 |
Investigation of the effect of laminated polymers in the metallic packaging materials on the recycling of aluminum by thermal disengagement technology (TDT) |
ELSEVIER- Journal of Cleaner Production |
Abdullah Al Mahmood, Rumana Hossain, Veena Sahajwalla |
2020 |
Journal |
CME |
Dr. Md. Abdullah Al Mahmood |
| 172 |
Microrecycling of the metal–polymer-laminated packaging materials via thermal disengagement technology |
Springer- SN Applied Science |
Abdullah Al Mahmood, Rumana Hossain, and Veena Sahajwalla |
2019 |
Journal |
CME |
Dr. Md. Abdullah Al Mahmood |
| 173 |
Low temperature synthesis of carbon nanostructure and effect of temperatures on the growth of amorphous carbon nanostructure |
IEEE |
Rahul Saha Joy, Mir Mohammad Adil, Abdullah Al Mahmood |
2019 |
Conference |
CME |
Dr. Md. Abdullah Al Mahmood |
| 174 |
Evolution and characterization of eggshell as a potential candidate of raw material |
Cerâmica |
Tasmia Zaman, Mst Sharmin Mostari, Abdullah Al Mahmood, MS Rahman |
2018 |
Journal |
CME |
Dr. Md. Abdullah Al Mahmood |
| 175 |
Effect of MgO on the physical, mechanical and microstructural properties of ZTA-TiO2 composites |
ELSEVIER- Material Science and Engineering: A |
Abdullah Al Mahmood, M.A.Gafur, and M.E.Hoque |
2017 |
Journal |
CME |
Dr. Md. Abdullah Al Mahmood |
| 176 |
EFFECT OF MgO ADDITION ON THE PHYSICAL AND FRACTURE BEHAVIOR OF ZIRCONIA TOUGHENED ALUMINA |
International Conference on Engineering Materials and Metallurgical Engineering, Bangladesh Council of Scientific and Industrial Research (BCSIR), Dhaka, Bangladesh |
Abdullah Al Mahmood, Md A Gafur, Md. Emdadul Hoque, Md. M. S. BasharRakibul Qadir, |
2016 |
Conference |
CME |
Dr. Md. Abdullah Al Mahmood |
| 177 |
Observation of mechanical properties of fiber reinforced polymer matrix composite |
International Conference on Mechanical, Industrial and Energy Engineering, KUET, Bangladesh |
Tasmia Zaman, Abdullah Al Mahmood, A Hafiz Zaman |
2014 |
Conference |
CME |
Dr. Md. Abdullah Al Mahmood |
| 178 |
Ceramics in Bangladesh: its recent evolution and future prospect |
International Conference of Mechanical, Industrial and Materials Engineering, RUET, Rajshahi |
Abdullah Al Mahmood, MS Rahman, Tasmia Zaman |
2013 |
Conference |
CME |
Dr. Md. Abdullah Al Mahmood |
| 179 |
Structural, morphological, and optical investigation of undoped and nickel doped titanium dioxide thin films |
Paper ID: ICMIEE24-06, 8th International Conference on Mechanical, Industrial and Energy Engineering 2024 02-04 January, 2025, Khulna-9203, Bangladesh |
M. Bodiul Islam et al. |
2025 |
Conference |
CME |
Prof. Dr. Md. Bodiul Islam |
| 180 |
Synthesis and characterization of SiO2 coated Fe3O4 nanoparticles by co-precipitation method |
Paper ID: ICMIEE24-20, 8th International Conference on Mechanical, Industrial and Energy Engineering 2024 02-04 January, 2025, Khulna-9203, Bangladesh |
M. Bodiul Islam et al. |
2025 |
Conference |
CME |
Prof. Dr. Md. Bodiul Islam |
| 181 |
Tailoring the structural and optical properties of TiO2 thin films: A study of undoped, N-doped, and Fe-doped variants via sol-gel spin coating |
Next Materials 8 (2025) 100757, Elsevier |
M. Bodiul Islam et al. |
2025 |
Journal |
CME |
Prof. Dr. Md. Bodiul Islam |
| 182 |
Eco-friendly synthesis of ZnO and Cu-doped ZnO nanoparticles via lemon juice: morphological, antibacterial, and photocatalytic performance evaluation |
Discover Catalysis (2025) 2:19, Springer |
M. Bodiul Islam et al. |
2025 |
Journal |
CME |
Prof. Dr. Md. Bodiul Islam |
| 183 |
Production of abrasive materials recycled from glass cullet and snail shell |
Waste Management Bulletin 2 (2024) 89–96, Elsevier |
M. Bodiul Islam et al. |
2024 |
Journal |
CME |
Prof. Dr. Md. Bodiul Islam |
| 184 |
The prospect of spray pyrolyzed pure, Mn-doped, and Zn-doped nickel oxide thin films as TCO material |
Heliyon 10 (2024) e24244, Elsevier |
M. Bodiul Islam et al. |
2024 |
Journal |
CME |
Prof. Dr. Md. Bodiul Islam |
| 185 |
Enhanced Photocatalytic Activity of Metal-Metal-Nonmetal Multidoped TiO2 Nanoparticles towards Visible Light |
ChemistrySelect 9 (5) (2024) e202304278, John Wiley and Sons |
M. Bodiul Islam et al. |
2024 |
Journal |
CME |
Prof. Dr. Md. Bodiul Islam |
| 186 |
Modification of structural, morphological, and dielectric properties of barium calcium titanate ceramics with yttrium addition |
Heliyon 10 (2024) e27124, Elsevier |
M. Bodiul Islam et al. |
2024 |
Journal |
CME |
Prof. Dr. Md. Bodiul Islam |
| 187 |
A progressive overview of the mainstream additive manufacturing of ceramic components for industrial advancement |
Materials Open Research 3:8 (2024), Taylor & Francis |
M. Bodiul Islam et al. |
2024 |
Journal |
CME |
Prof. Dr. Md. Bodiul Islam |
| 188 |
Enhanced photocatalytic activity of Cr-doped CaTiO3 particles synthesized by solid state reaction route |
Int. J. Environ. Sci. Technol. (2024), Springer Nature |
M. Bodiul Islam et al. |
2024 |
Journal |
CME |
Prof. Dr. Md. Bodiul Islam |
| 189 |
Structural, morphological, optical, and antimicrobial study of Mikania micrantha (leaf) extract treated zinc doped cobalt ferrite nanoparticles and antibacterial clothing applications |
Results in Surfaces and Interfaces 17 (2024) 100303, Elsevier |
M. Bodiul Islam et al. |
2024 |
Journal |
CME |
Prof. Dr. Md. Bodiul Islam |
| 190 |
Sustainable transformation of waste Aluminium into high-performance composites: A review |
International Journal of Lightweight Materials and Manufacture 8 (2025) 194e204, Elsevier |
M. Bodiul Islam et al. |
2024 |
Journal |
CME |
Prof. Dr. Md. Bodiul Islam |
| 191 |
Green synthesis of ZnO and Cu-doped ZnO nanoparticles using Aloe vera gel and investigation of their structural, photocatalytic, and antibacterial properties |
Cerâmica 70 (2024) |
M. Bodiul Islam et al. |
2024 |
Journal |
CME |
Prof. Dr. Md. Bodiul Islam |
| 192 |
Replacement of CaO by Recycled Bone Ash in Whitewares |
Paper ID: ICMIME2024-84, International Conference on Mechanical, Industrial and Materials Engineering 2024 (ICMIME2024), 11-13 December, 2024, RUET, Rajshahi-6204, Bangladesh |
M. Bodiul Islam et al. |
2024 |
Conference |
CME |
Prof. Dr. Md. Bodiul Islam |
| 193 |
Synthesis and characterization (optical and antibacterial) of silver doped zinc oxide nanoparticles |
Open Ceramics 14 (2023) 100370, Elsevier |
M. Bodiul Islam et al. |
2023 |
Journal |
CME |
Prof. Dr. Md. Bodiul Islam |
| 194 |
Structural, morphological and optical characterizations of spray pyrolyzed nickel oxide thin films |
Results in Materials 14 (2022) 100265, Elsevier |
M. Bodiul Islam et al. |
2022 |
Journal |
CME |
Prof. Dr. Md. Bodiul Islam |
| 195 |
Synthesis of Cobalt Ferrite Nanoparticles Using Microemulsion Method: Structure, Morphology, and Magnetic Properties |
Journal of Engineering Science 13(1), 2022, 81- 87 |
M. Bodiul Islam et al. |
2022 |
Journal |
CME |
Prof. Dr. Md. Bodiul Islam |
| 196 |
Facile fabrication of abrasive materials for sandpaper from waste materials |
Cleaner Waste Systems 4 (2023) 100066, Elsevier |
M. Bodiul Islam et al. |
2022 |
Journal |
CME |
Prof. Dr. Md. Bodiul Islam |
| 197 |
Sol-Gel Synthesis and Characterization of Titanium Dioxide Nanoparticles |
Paper ID: 70, 5th International Conference on Mechanical, Industrial and Materials Engineering 2022 (ICMIME 2022) |
M. Bodiul Islam et al. |
2022 |
Conference |
CME |
Prof. Dr. Md. Bodiul Islam |
| 198 |
Effect of Zinc Doping on the Properties of Nickel Oxide Films |
Paper ID: 162, 5th International Conference on Mechanical, Industrial and Materials Engineering 2022 (ICMIME 2022) |
M. Bodiul Islam et al. |
2022 |
Conference |
CME |
Prof. Dr. Md. Bodiul Islam |
| 199 |
Prospect of Ag and N codoped p-type ZnO thin films for optoelectronic device applications |
Journal of Engineering and Applied Science 03, 01 (2019) 98–106 |
M. Bodiul Islam et al. |
2019 |
Journal |
CME |
Prof. Dr. Md. Bodiul Islam |
| 200 |
Highly stable semi-transparent MAPbI3 perovskite solar cells with operational output for 4000 h |
Solar Energy Materials and Solar Cells 195 (2019) 323–329, Elsevier |
M. Bodiul Islam et al. |
2019 |
Journal |
CME |
Prof. Dr. Md. Bodiul Islam |
| 201 |
Effect of hydroxyl groups in NiOx on the open circuit voltage of lead iodide perovskite solar cells |
Japanese Journal of Applied Physics 57, 08RE06 (2018) 1–6, IOPSCIENCE |
M. Bodiul Islam et al. |
2018 |
Journal |
CME |
Prof. Dr. Md. Bodiul Islam |
| 202 |
NiOx Hole Transport Layer for Perovskite Solar Cells with Improved Stability and Reproducibility |
ACS Omega 2, 5 (2017) 2291–2299 |
M. Bodiul Islam et al. |
2017 |
Journal |
CME |
Prof. Dr. Md. Bodiul Islam |
| 203 |
Facile Preparation of High Quality p-Type Cu2O for Thin Film Solar Cells |
International Journal of Computer Science and Electronics Engineering (IJCSEE) 4, 1 (2016) 25–30 |
M. Bodiul Islam et al. |
2016 |
Journal |
CME |
Prof. Dr. Md. Bodiul Islam |
| 204 |
Spray pyrolized Ag–N co-doped p-type ZnO thin films’ preparation and study of their structural, surface morphology and opto-electrical properties |
Thin Solid Films 534 (2013) 137–143, Elsevier |
M. Bodiul Islam et al. |
2013 |
Journal |
CME |
Prof. Dr. Md. Bodiul Islam |
| 205 |
Temperature dependent electrical properties of Ag-N codoped p-type ZnO thin films |
Paper no. ICERIE-409, Proceedings of the International Conference on Engineering Research, Innovation and Education 2013 (ICERIE 2013), 11-13 January, SUST, Sylhet, Bangladesh |
M. Bodiul Islam et al. |
2013 |
Conference |
CME |
Prof. Dr. Md. Bodiul Islam |
| 206 |
Improved dielectric and magnetic properties of diluted magnetic semiconductor Zn1-xMnxO |
Paper no. ICMERE2013-PI-022, Proceedings of the International Conference on Mechanical Engineering and Renewable Energy 2013 (ICMERE2013), 24-27 December 2013, Chittagong, Bangladesh |
M. Bodiul Islam et al. |
2013 |
Conference |
CME |
Prof. Dr. Md. Bodiul Islam |
| 207 |
Comparative Environmental Impact Analysis for Natural and Synthetic Fiber Reinforced Composites from a Life Cycle Assessment Context |
8th International Conference on Mechanical, Industrial and Energy Engineering [ICMIEE 2024], Khulna University of Engineering & Technology (KUET) |
Md. Sidratul Montaha Hossain, Abdullah Al Mahmood |
2025 |
Conference |
CME |
Md. Sidratul Montaha Hossain |
| 208 |
Life Cycle Assessment of Conventional and Alternative Methods for Aluminum Extraction from Lithium-Ion Batteries |
International Conference on Emerging Technologies for Sustainable Development (ICETSD 2025), Jessore University of Science and Technology |
Tahmid Islam Siyam, Md. Eftakhar Ahmed, Md. Sidratul Montaha Hossain, Md. Bodiul Islam, Abdullah Al Mahmood |
2025 |
Conference |
CME |
Md. Sidratul Montaha Hossain |
| 209 |
Synthesis and Characterization of Selective Surface Coating Using Copper(II) Nitrate and Aluminum Nitrate Solutions |
3rd International Conference on Mechanical Engineering and Applied Sciences, 2025 (ICMEAS – 2025), Military Institute of Science and Technology (MIST) |
Md. Sidratul Montaha Hossain, Meftahul Jannat Rownok, Shahriar Ahmed, M.Bodiul Islam, Abdullah Al Mahmood |
2025 |
Conference |
CME |
Md. Sidratul Montaha Hossain |
| 210 |
Design and Evaluation of a Sustainable Hybrid Solar Thermal System for Efficient Drying Applications |
1st International Research Conference (IRC2025), University of Rajshahi |
Abdullah Al Mahmood, Md. Ashraful Alam, Md. Sidratul Montaha Hossain, Md. Roni & M. Bodiul Islam |
2025 |
Conference |
CME |
Md. Sidratul Montaha Hossain |
| 211 |
Comparative Analysis of Environmental Impacts Caused by the Natural Fiber Reinforced Composites: A Life Cycle Assessment (LCA) Approach |
BCSIR Congress 2023 |
Abdullah Al Mahmood, Md. Sidratul Montaha Hossain, and Md. Wahidur Rashid |
2024 |
Conference |
CME |
Md. Sidratul Montaha Hossain |
| 212 |
Bio Composite Made of Maize Starch Reinforced by Banana Stem Fiber: An Approach Towards Sustainable Composite Material for Packaging Purposes |
6th International Conference on Mechanical, Industrial and Materials Engineering (ICMIME 2024), Rajshahi University of Engineering & Technology (RUET) |
Md. Sidratul Montaha Hossain, Z M Taif Al Hossain, Shaheed Al Magfur |
2024 |
Conference |
CME |
Md. Sidratul Montaha Hossain |
| 213 |
Determination of Environmental Impacts of Natural Fiber Reinforced Composites by Life Cycle Assessment (LCA) Tool |
7th International Conference on Mechanical and Renewable Energy [ICMERE-2023], Chittagong University of Engineering & Technology (CUET) |
Abdullah Al Mahmood, Md. Sidratul Montaha Hossain, Md. Wahidur Rashid |
2023 |
Conference |
CME |
Md. Sidratul Montaha Hossain |
| 214 |
Investigation of the Effect of Fe-Doping on the Structural and Morphological properties of ZnO Nanopowder via a Chemical Co-Precipitation Approach for Photocatalytic Applications |
3rd International Conference on Mechanical Engineering and Applied Sciences, 2025 (ICMEAS 2025), Military Institute of Science and Technology (MIST), 2025 |
Shah Sadia Rahman Joya, Md. Estabrak Ahammod Sakib and Md. Lael Hasan |
2025 |
Conference |
CME |
Shah Sadia Rahman Joya |
| 215 |
Eco‐Friendly Synthesis of ZnO and Ag‐Doped ZnO Nanoparticles Using Onion Peel Extract: Characterization and Comparative Analysis |
ChemistrySelect, Vol. 10 |
Joya, Shah and Prerona, Sanjida and Kabir, M. and Molla, Anik and Hossain, Md and Rahman, Md |
2025 |
Journal |
CME |
Shah Sadia Rahman Joya |
| 216 |
Bio Waste to Building Blocks: Sustainable Ceramic Tile Development Using Fish Bone Derivatives |
RUEC International Research Conference 2025 |
Shah Sadia Rahman Joya, Sadia Samanta, Md Shamim Hossain Raju |
2025 |
Conference |
CME |
Shah Sadia Rahman Joya |
| 217 |
Doping-induced synergistic modulations in the dielectric and optical properties of multi-doped barium titanate ceramics |
Progress in Engineering Science, Elsevier |
Md. Jahidul Haque et al. |
2025 |
Journal |
CME |
Md. Jahidul Haque |
| 218 |
Aloe vera assisted green synthesis of Ag and Cu co-doped ZnO nanoparticles and a comprehensive analysis of their structural, morphological, optical, electrical and antibacterial properties |
Heliyon, Elsevier |
Md. Jahidul Haque et al. |
2024 |
Journal |
CME |
Md. Jahidul Haque |
| 219 |
Frequency dependent electrical properties of BaTiO₃ ceramics, co-doped with K and Bi |
BCSIR Congress |
Md. Jahidul Haque et al. |
2024 |
Conference |
CME |
Md. Jahidul Haque |
| 220 |
Synthesis and investigation of frequency-dependent dielectric behavior in potassium, strontium, and niobium-doped and co-doped barium titanate ceramics |
ICMIME-2024 (RUET) |
Md. Jahidul Haque et al. |
2024 |
Conference |
CME |
Md. Jahidul Haque |
| 221 |
A progressive overview of the mainstream additive manufacturing of ceramic components for industrial advancement |
Materials Open Research, Taylor & Francis |
Md. Jahidul Haque et al. |
2024 |
Journal |
CME |
Md. Jahidul Haque |
| 222 |
Plant fiber-reinforced green composite: A review on surface modification, properties, fabrications and applications |
Materials Open Research |
Md. Jahidul Haque et al. |
2024 |
Journal |
CME |
Md. Jahidul Haque |
| 223 |
Synthesis and characterization (optical and antibacterial) of silver doped zinc oxide nanoparticles |
Open Ceramics, Elsevier, vol: 14, 100370 |
Md. Jahidul Haque et al. |
2023 |
Journal |
CME |
Md. Jahidul Haque |
| 224 |
An investigation and study of the morphology, optical and electrical properties of cobalt doped boron-zinc oxide thin films |
The 7th International Conference on Mechanical Engineering and Renewable Energy-ICMERE 2023 |
Md. Jahidul Haque et al. |
2023 |
Conference |
CME |
Md. Jahidul Haque |
| 225 |
Approaches for Sensor Surfaces Modification |
Springer |
Md. Jahidul Haque et al. |
2023 |
Book Chapter |
CME |
Md. Jahidul Haque |
| 226 |
Effect of Ga doping on structural, morphological, optical and electrical properties of CuO thin films deposited by spray pyrolysis technique |
Mater Sci: Mater Electron 34, 1258 (2023) |
Md. Jahidul Haque et al. |
2023 |
Journal |
CME |
Md. Jahidul Haque |
| 227 |
Effect of novel phase change material (PCM) encapsulated design on thermal performance of solar collector |
Results in Materials, Volume 18, June 2023, 100388 |
Md. Jahidul Haque et al. |
2023 |
Journal |
CME |
Md. Jahidul Haque |
| 228 |
Manufacturing and Characterization of Plaster of Paris (POP) Bandage from Waste Material for Orthopedic Applications |
14th International Conference on Mechanical Engineering -ICME 2023 (BUET) |
Md. Jahidul Haque et al. |
2023 |
Conference |
CME |
Md. Jahidul Haque |
| 229 |
Surface Acoustic Wave Sensors |
Springer |
Md. Jahidul Haque et al. |
2023 |
Book Chapter |
CME |
Md. Jahidul Haque |
| 230 |
Advanced Nanomaterials for Dentistry, Sustainable Nanomaterials for Biosystem Engineering Impacts, Challenges, and Future Prospects |
Apple Academic Press & CRC Press (Tailor & Francis Group), ISBN: 9781774910665 |
Md. Jahidul Haque et al. |
2022 |
Book Chapter |
CME |
Md. Jahidul Haque |
| 231 |
Usage of Bionanomaterials in Production of Solar Energy |
Apple Academic Press & CRC Press (Tailor & Francis Group), ISBN: 9781774912010 |
Md. Jahidul Haque et al. |
2022 |
Book Chapter |
CME |
Md. Jahidul Haque |
| 232 |
A Prospective Review on Dense and High Ionic Conductivity of LSGM Electrolytes Sintered at Lower Temperature through Different Routes |
4th International Conference on Physics for Sustainable Development and Technology (ICPSDT-2022) |
Md. Jahidul Haque et al. |
2022 |
Conference |
CME |
Md. Jahidul Haque |
| 233 |
A Comprehensive Review Regarding the Technological Development of ZnO Thin Films From 2018 To 2021 |
4th International Conference on Physics for Sustainable Development and Technology (ICPSDT-2022) |
Md. Jahidul Haque et al. |
2022 |
Conference |
CME |
Md. Jahidul Haque |
| 234 |
Synthesis of Cobalt Ferrite Nanoparticles Using Microemulsion Method: Structure, Morphology, and Magnetic Properties |
Journal of Engineering Science, vol: 13(1) |
Md. Jahidul Haque et al. |
2022 |
Journal |
CME |
Md. Jahidul Haque |
| 235 |
Effect of Ga doping on microstructure, morphology, optical and electrical properties of spray deposited CdO thin films |
Optical Materials Volume 125, March 2022, 112123 |
Md. Jahidul Haque et al. |
2022 |
Journal |
CME |
Md. Jahidul Haque |
| 236 |
Biodegradation of Industrial Materials |
Springer |
Md. Jahidul Haque et al. |
2022 |
Book Chapter |
CME |
Md. Jahidul Haque |
| 237 |
Fabrication and Performance Analysis of Porcelain Stoneware Tiles Incorporated With Labware Glass Cullet |
Transactions of the Indian Ceramic Society (Taylor & Francis Online), Vol. 80 (1) |
Md. Jahidul Haque et al. |
2021 |
Journal |
CME |
Md. Jahidul Haque |
| 238 |
Nano synthesis of ZnO–TiO2 composites by sol-gel method and evaluation of their antibacterial, optical and photocatalytic activities |
Results in Materials Volume (Elsevier), Vol. 11, September 2021, 100199 |
Md. Jahidul Haque et al. |
2021 |
Journal |
CME |
Md. Jahidul Haque |
| 239 |
Structural, electrical, and magnetic characterization of (1-x)BaTiO3-x Ni0.6Zn0.4Fe2O4 multiferroic ceramic composites |
Materials Engineering Research, Vol. 3, Issue 1 |
Md. Jahidul Haque et al. |
2021 |
Journal |
CME |
Md. Jahidul Haque |
| 240 |
Effect of Al doping on morphology and optical properties of spray pyrolized MgO thin films |
Results in Materials Volume (Elsevier), Vol. 12, December 2021, 100199 |
Md. Jahidul Haque et al. |
2021 |
Journal |
CME |
Md. Jahidul Haque |
| 241 |
Effect of mono-dopants (Mg2+) and co-dopants (Mg2+, Zr4+) on the dielectric, ferroelectric and optical properties of BaTiO3 ceramics |
Materials Research Express (IOPSCIENCE), Vol. 7 (6) |
Md. Jahidul Haque et al. |
2020 |
Journal |
CME |
Md. Jahidul Haque |
| 242 |
Synthesis of ZnO nanoparticles by two different methods & comparison of their structural, antibacterial, photocatalytic and optical properties |
Nano Express (IOPSCIENCE), Vol. 1 (1) |
Md. Jahidul Haque et al. |
2020 |
Journal |
CME |
Md. Jahidul Haque |
| 243 |
Enhanced dielectric, ferroelectric, and ferromagnetic responses of BaZr0.2Ti0.8O3–Ni0.5Zn0.5Fe2O4 multiferroic ceramic composite |
Results in Materials (Elsevier) Volume 8, December 2020, 100148 |
Md. Jahidul Haque et al. |
2020 |
Journal |
CME |
Md. Jahidul Haque |
| 244 |
The Strategic Role of Nanoparticles in the Biological System Dealing with Complex Diseases and Medication. Mat Int The Strategic Role of Nanoparticles in the Biological System Dealing with Complex Diseases and Medication |
Materials International, Vol. 2 (4) |
Md. Jahidul Haque et al. |
2020 |
Journal |
CME |
Md. Jahidul Haque |
| 245 |
Improved structural and electrical properties of Mg-doped BaTiO3 ceramics for energy storage applications |
International Conference on Materials, Energy, Environment and Engineering (ICMEEE)-2020 |
Md. Jahidul Haque et al. |
2020 |
Conference |
CME |
Md. Jahidul Haque |
| 246 |
Optimization of Sr and Zr Co‑doping in lithium lanthanum titanate perovskite electrolytes for high‑performance solid‑state battery applications |
Journal of Materials Science: Materials in Electronics |
Md. Rakibul Islam Bilash et al. |
2025 |
Journal |
CME |
Md. Rakibul Islam Bilash |
